:	Aug 2, 2005

.

Make the SRS system safe.

.

Remove the front safety belt buckle.

.

Remove the front seat cushion side trim.   Remove the 2 screws.   Release from the 3 clips.

.

Remove the seat backrest hinge cover.   Remove the 2 screws.   Release from the clip.

.

Remove the front seat backrest assembly.   Release the retaining clips and disconnect the three electrical connectors.   Remove the 4 Torx bolts.

.

Remove the front seat grab handles.   Remove the bolt covers.   Remove the 2 bolts.

.

:   Head restraint release latch is underneath backrest cover. Remove the front seat head restraint.   Release the front seat head restraint latch.

.

Remove the front seat armrest.   Remove the bolt cover.   Remove the Torx bolt.

.

Remove the front seat lumbar adjustment knob.   Pull sharply to release from lumbar mechanism.

.

Release the front seat backrest cover.   Release the 5 clips.   Release the tension straps.

.

Remove the front seat backrest cover.   Remove the 3 hog rings.

.

Install the front sear backrest cover.   Install the hog rings.   Install the clips.   Attach the tension straps.

.

Install the front seat lumbar adjustment knob.   Push firmly to secure to the lumbar mechanism.

.

Install the front seat armrest.   Tighten the Torx bolt to 10 Nm (7 lb.ft).   Install the bolt cover.

.

Install the front seat head restraint.

.

Install the front seat grab handles.   Tighten the bolts to 25 Nm (18 lb.ft).   Install the bolt covers.

.

Install the front seat backrest assembly.   Tighten the Torx bolts to 25 Nm (18 lb.ft).   Connect and secure the electrical connectors.

.

Install the seat backrest hinge cover.   Tighten the screws.   Fit the clip.

.

Install the front seat cushion side trim.   Position and secure in the clips.   Install the screws.

.

Install the front safety belt buckle.